Tig Wire

Product Details:

Anuvrat TIG ER316L is a solid wire for TIG welding, available in bright finish,

gives smooth flow,stable arc and spatter free under optimum welding conditions.

It gives radiographic quality weld deposit. The weld metal has excellent

resistance to intergranular corrosion even at elevated temperatures. It is ideal

for welding stainless steel of similar composition in wrought or cast form and for

overlay application to resist heat and corrosion. It is suitable for number of

industries like rayon, dye, paper, chemical, fertilizer, petrochemicals, etc.

Product Details:

ANUVRAT TIG ER316 is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality weld deposit. The weld metal has excellent resistance to intergranular corrosion even at elevated temperatures. It is ideal for welding stainless steel of similar composition in wrought or cast form and for overlay application to resist heat and corrosion. It is suitable for number of industries like rayon, dye, paper, chemical, fertilizer, petrochemicals, etc.

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

Anuvrat Tig- 80S D2 is a copper-coated solid wire for GTAW, available in bright finish. The wire gives stable arc, smooth welding performances and deposits radiographic quality welds. It is recommended for welding of molybdenum (~0.5%) containing high strength fine-grained structural steels. The wire also is suitable for welding of penstock pipe-line, fabrication of earth moving equipments, etc. where high tensile strength property is desired from the weld metal Suitable for welding of ASTM steels: SA-455/ SA-455M, Gr.60, Gr.65 steels of SA-515/ SA-515M, Gr.60, Gr.65 steels of SA-516/ SA-516M, Class 1 of A, B, C, D grades of SA-533/ SA-533M, etc

Additional Information:

• Delivery Time: AS PER REQUIREMENT

Product Details:

ANUVRAT TIG ER309 is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality weld deposit. The weld metal has excellent mechanical properties and possesses good oxidation and scaling resistance at elevated temperatures. It is ideally suited for welding stainless steels, wrought and cast materials of similar composition, welding of 18/8 type stainless steels to carbon steels for buffer layers, for welding clad side of 18/8clad stainless steels, etc.

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT TIG ER410NiMo is a solid wire for TIG welding, available in bright  finish, gives smooth flow, stable arc and spatter free under optimum welding  conditions. It gives radiographic quality weld deposit. Weld metal possesses  excellent resistance to corrosion, pitting, abrasion, and impact. Welding for surfacing of ASTM CA 6 NM castings and similar composition subjected to wear by corrosion erosion, abrasion combined with impact .ideally suitable for welding of guide vanes and runner, hard facing of values seats,turbine blades in hydro power plants,pulp and paper machinery, rebuilding of of gas, steam turbines,etc

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT -TIG - ER 70S-G is a  copper coated, manganese-silicon alloyed GTAW wire for welfing of all general engineering and structural steels with minimum yield strength of max 400 Mpa. High levels of silicon and manganese for use on sightly contaminated base material.ANUVRAT -TIG - ER 70S-G Contains more deoxidizers than ER70S-3. The additional deoxidizers also provide better wetting, giving a flatter bead shape and the capability of faster travel speeds. The Welding rod is suitable for joint welding in the construction of small diameter pipe and tubing,process piping, containers & Offshores structure.

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT TIG ER309L is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality weld deposit. The weld metal has excellent mecha- nical properties and possesses good oxidation and scaling resistance at elevated temperatures. It is ideally suited for welding stainless steels, wrought and cast materials of similar composition, welding of 18/8 type stainless steels to carbon  steels for buffer layers, for welding clad side of 18/8 clad stainless steels, etc. 

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

Anuvrat Tig ER Cu is a deoxidized copper alloy developed to provide dense, High quality deposits with relatively high electrical conductivity for use in joining  and overlaywith the inert-gas processes. Anuvrat Tig ER Cu and  filler metal rod are used primarily to fabricate deoxidized copper and repair  weld copper castings with the  gas tungsten-arc processes. This weld material is used to fabricate deoxidized copper and repair weld copper  castings. Anuvrat Tig ER Cu Can also be used to weld galvanized steel and deoxidized  copper to weld steel where high strength joints are not required.  

Additional Information:

• Delivery Time: as per requirement

Product Details:

ANUVRAT TIG ER 2594  is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. The weld metal exhibits high strength, high impact energy, and resistance to stress corrosion cracking, pitting, and crevice corrosion. The weld metal possesses excellent corrosion resistance in marine & paper environments. Examples of application areas are: Oil and gas industry, Off shore plat forms, Petrochemical plants, Mechanical and structural components.   

Additional Information:

• Delivery Time: AS PER REQUIREMENT

Product Details:

ANUVRAT TIG ERNiCu-7 is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. The weld metal possesses good resistance to corrosion by seawater, chlorinated solvents, sulfuric acid and alkalies. It is ideally suited for welding of monel- to-monel, Ni-Cu alloys to themselves, Ni-Cu alloy to steels, for welding clad side of Ni- Cu clad steel and for surfacing on steel parts. It is ideal for marine, chemical, food, dairy and oil refining industries

Additional Information:

• Delivery Time: AS PER REQUIREMENT

Product Details:

ANUVRAT TIG ER309  Mo is a solid wire for TIG welding available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality weld deposit. A highly crack resistant weld deposit which displays good intergranular corrosion resistance and good oxidation and scaling resistance at elevated temperatures. It is for welding stainless steel of similar composition in wrought or cast form and for overlay application to resist heat and corrosion. Suitable for joining dissimilar steels, such 18-11-Mo steel to mild steel, clad side welding of 18-11-Mo steel, and for buffer layer applications. 

Additional Information:

• Delivery Time: as per terms

Product Details:

ANUVRAT TIG ERNiCr-3 is a solid wire for GTA / TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. This wire is used for welding a range of Inconel 600, 601, 690, Incoloy 800, 800H, 800HT, 9% Nickel steel, ASTM B 163, B 166, B 167, B 168 etc. Used for dissimilar applications with carbon steel to stainless steels, low alloy steel to stainless steel and also for 200 and 400 type alloys

Additional Information:

• Delivery Time: as per terms

Product Details:

This wire rods with low carbon content confirms to AWS - SFA 5.9 ER 308L class. The Weld metal is very good resistant to inter granular corrosion with free from porosity & molten pool, and controlled ferrite.It is used for welding AISI, ASTM 308,304, 304L type of stainless Steel Plates, Sheets, Pipes, Tubes etc. Fabricating Equipments for Dairy, Chemical, & Fertilizer Industries, Oil refineries, Specially use for root run. 

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT TIG ERNiCr-3 is a solid wire for GTA / TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. This wire is used for welding a range of Inconel 600, 601, 690, Incoloy 800, 800H, 800HT, 9% Nickel steel, ASTM B 163, B 166, B 167, B 168 etc. Used for dissimilar applications with carbon steel to stainless steels, low alloy steel to stainless steel and also for 200 and 400 type alloys

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

This wire rods with low carbon content confirms to AWS - SFA 5.9 ER 308L class.  The Weld metal is very good resistant to inter granular corrosion with free from porosity & molten pool, and controlled ferrite.It is used for welding AISI, ASTM 308,304, 304L type of stainless Steel Plates, Sheets, Pipes, Tubes etc. Fabricating Equipments for Dairy, Chemical, & Fertilizer Industries, Oil refineries, Specially use for root run

Additional Information:

• Delivery Time: as per terms

Product Details:

ANUVRAT TIG ER2209 is utilized for joining 22% Cr/ 5% Ni duplex stainless steels. 2205 Duplex base material exhibits higher strength as compared with standard austenitic stainless steels, such as 316L. This material possesses good general corrosion resistance in a wide range of environments, but also has high resistance to pitting attack in chloride environments, such as sea water.

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT TIG ER347 is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality weld deposit. The Nb reduces the possibility of intergranular chromium carbide precipitation and thus susceptibility to intergranular corrosion and high temperature strength. It is suitable for welding Cr – Ni stabilized stainless steels of type AISI 347, 321, etc

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

Anuvrat Tig ER Cu Ni is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It is for joining and surfacing of wrought and cast alloys of similar composition as well as 80/20 and 90/10 alloys. Ideally suited for offshore applications because of its good resistance to the corrosion in seawater. It is also suitable for chemical process equipments, oil refineries, food industries, etc

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT TIG ER316L is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality weld deposit. The weld metal has excellent resistance to intergranular corrosion even at elevated temperatures. It is ideal for welding stainless steel of similar composition in wrought or cast form and for overlay application to resist heat and corrosion. It is suitable for number of industries like rayon, dye, paper, chemical, fertilizer, petrochemicals, etc.

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT TIG ER 308 is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. It is ideally suited for welding of stainless steels of similar composition like 304 and equivalents, for overlays, surfacing, and repairing castings of similar materials.

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

Anuvrat Tig- 80S D2 is a copper-coated solid wire for GTAW, available in bright finish. The wire gives stable arc, smooth welding performances and deposits radiographic quality welds. It is recommended for welding of molybdenum (~0.5%) containing high strength fine-grained structural steels. The wire also is suitable for welding of penstock pipe-line, fabrication of earth moving equipments, etc. where high tensile strength property is desired from the weld metal Suitable for welding of ASTM steels: SA-455/ SA-455M, Gr.60, Gr.65 steels of SA-515/ SA-515M, Gr.60, Gr.65 steels of SA-516/ SA-516M, Class 1 of A, B, C, D grades of SA-533/ SA-533M, etc

Additional Information:

• Delivery Time: AS PER TERMS

Product Details:

ANUVRAT TIG ER NiCrMo-3 is a solid wire for TIG welding, available in bright finish,  gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. It is ideal for welding Ni-Cr-Mo alloys to themselves  and to steel, and for surfacing steel. The wires are use in applications where the  temperature ranges 0 from cryogenic to 540 C. It is also suitable for welding Ni base  alloys to steel. Ideal for valves, valve seats, impellers, guide points, bushing, bearings,  journals, hot working tools like hot shear blades, forging dies, trimming dies, piercing punches e

Additional Information:

• Delivery Time: AS PER REQUIREMENT

Product Details:

 ANUVRAT  TIG ER5356 is a Al-5Mg solid wire .It has excellent feed ability with  Consistent welding performance, most versatile and universally used filler material, High strength weld with very good corrosion resistance in marine environment, Radiographic weld quality. ANUVRAT  TIG ER5356 is used for Welding of similar composition Al-Mg,  Al-Mg-Zn and Al-Mg-Si alloys, Automotive, Marine application, Structural fabrication, Welding Al alloys containing more than 3% Mg.